Can continuous tyre pyrolysis plant be profitable?
2018-06-29 17:28
Economic profit analysis
|
Continuous Waste Tire Pyrolysis Plant Profit Analysis (take a 10-ton machine as an example) |
|
|
Operating cost/day |
|
|
Used tires |
10 tons * 80 US dollars/ton = 800 US dollars |
|
Heating fuel |
1) Coal: 0.4 tons * 125 US dollars/ton = 50 US dollars |
|
Power consumption |
20Kw/h = 30 U.S. dollars |
|
Water consumption |
Water is recycled and almost no consumption |
|
Workers |
1 persons * 23 U.S. dollars = $ 23 |
|
Earnings/day |
|
|
Fuel |
4 tons * $490/ton = $1960 |
|
Carbon black |
3 tons: (1) Direct selling, *60 US dollars/ton = 180 US dollars |
|
Steel wire |
1.5 tons * 120 US dollars/ton = 180 US dollars |
|
Profit/day (calculated on the basis of burning fuel oil and carbon black) |
$1,321/day |
The end product of continuous tyre pyrolysis plant has a good sales market and a wide range of applications.
Final products of continuous tyre pyrolysis plant
Fuel oil
The main product produced by continuous tyre pyrolysis plant is fuel oil, and the oil yield rate can reach 45%-55%. It is widely used as fuel for iron plants, power plants, cement factories, brick plants and so on. It can also be reprocessed into diesel by the use of DOING waste oil distillation machine to achieve a wider range of applications and higher profits.
Carbon black
Carbon black can be used for building clay bricks or as a fuel. If further processed by DOING carbon black grinding machine, carbon black can be further processed into N220, N330 carbon black, which has higher value and wider application. In addition, it can also press the ball to burn and burn.
Steel wire
The steel wire can be sold directly or recycled to produce new steel products.
Continuous tyre pyrolysis plant profitable
Finally, investment in continuous tyre pyrolysis plant is both profitable and challenging. Before you decide to do this project, each investor should carefully consider his situation. First of all, whether there are abundant raw materials, used tires, waste plastics, rubber, and medical waste, etc. Second, is there a suitable place? Third, whether the product has a sales market. If all the answers are correct, waste rubber recycling machines will be a wise investment for you.
If you have any other problems with the continuous tyre pyrolysis plant, please feel free to contact us and our engineers will provide you with a satisfactory solution.
Previous： Plastic waste can be converted to useful fuel
Next：Advantages of the vacuum extraction carbon black discharge system
