6/8/10T capacity waste plastic pyrolysis to oil plant

Continuous Tyre Pyrolysis plant

DOING factory manufacture many different modes of waste plastic pyrolysis to oil plant to meet pyrolysis machine buyer needs

Chat Online Leave A Message

convert plastic to oil, plastic to oil,fuel from plastic waste
Waste plastic pyrolysis to oil plant

 DY-6T capacity waste plastic pyrolysis to oil plant (D2200mm*L6000mm)
1. This mode of waste plastic pyrolysis to oil plant can load 6 tons of plastic.
2. After finishing one batch, with auto-feeder, you don't need to wait the pyrolysis machine cooling down since workers will have to go inside to feed material. If you don't have one, in that way it will be time-wasting and dangerous.
3. Built-in spiral plates, these plates will make the waste plastic go ahead.

DY-8T capacity waste plastic pyrolysis to oil plant (D2200mm*L6600mm)
1. It can load 8 tons of waste plastic.
2. The reactor adopts Q245R steel plant and its thickness is 16 mm, which can bear 500-750 batches.
3. We can also make reactor by material Q245R, which obviously prolong service life 3-5 times.
4. The reactor has two layers, the outer layer built-in cotton insulation, fire cement and steel.

DY-10T capacity waste plastic pyrolysis to oil plant (D2600mm*L6600mm)
1. Working with Auto-feeder, it is able to contain 10 tons or 12tons waste plastic.
2. The diameter of feeding port is 1200mm or 1400mm.
After 2 hours feeding time, it's time to heat the reactor by coal/wood/natural gas/crude oil. Generally speaking, when the temperature ups to 155 Celsius degrees around, the oil gas will generate.
Waste plastic working time you may need:
Let’s take 10 tons waste plastic that processed by DOING waste plastic pyrolysis to oil plant as an example:

Model Feeding Processing Cooling Discharge Total
2200*6000 1.5hr 7-8hr 1.5hr 1.5hr 12hr
2200*6600 1.5hr 8hr 1.5-2hr 1.5hr 14hr
2600*6600 2 hr 10 hr 2-3 hr 2-3 hr 16-18 hr


 

 

Technical parameter of 6/8/10T capacity waste plastic pyrolysis to oil plant
  No. Items Contents
1 Equipment type DY-1-6 DY-1-8 DY-1-10
2 Raw material Waste plastic Waste plastic Waste plastic
3 Structural form Horizontal rotation Horizontal rotation Horizontal rotation
4 24-hour Capacity 6 ton 8 ton 10 ton
5 Oil yield 2.7-3.3ton 3.6 -4.4ton 4.5 -5.5ton
6 Operating pressure Normal Normal Normal
7 Material of pyrolysis Reactor Q245R Q245R Q245R
8 Thickness of pyrolysis Reactor 16mm 16mm 16mm
9 Rotate speed of pyrolysis Reactor 0.4turn/minute 0.4turn/minute 0.4turn/minute
10 Total power 19KW 19KW 19KW
11 Mode of cooling Water cooling Water cooling Water cooling
12 Cooling area of condenser 100sqm 100sqm 100sqm
13 Kind of transmission Internal gear drive Internal gear drive Internal gear drive
14 Noise dB(A) ≤85 ≤85 ≤85
15 Size of Reactor(D×L) 2200×6000 2200×6600 2600×6600
16 Working form Intermittent operation Intermittent operation Intermittent operation
17 Delivery time 20days 20days 20days
18 Weight 27T 30T 35T

Prepared by customer about 6/8/10T capacity waste plastic pyrolysis to oil plant
No. Item Consumption
1 Coal(for choice) 500kg/day
2 Wood(for choice) 800kg/day
3 Natural gas(for choice) 100-150kg/day
4 Oil(for choice) 300-350kg/day
5 Electricity 244kwh/day
6 Water(recycled) 60㎥ /month
7 Total power 19kw
8 Land area 35m*15m
Waste plastic pyrolysis to oil plant is a very good investment, not only can efficiently deal with a large number of abandoned tyres, turn waste into treasure, but also can avoid environmental pollution caused by landfill or burning these waste.
waste plastic pyrolysis to oil plant
plastic to fuel ,convert plastic to oil,plastic to oil 
 

Leave A Message About 6/8/10T capacity waste plastic pyrolysis to oil plant

Pyrolysis Plant Products

Refined tyre oil can be directly used in tractor

tyre to oil

Continuous Tyre Pyrolysis plant Solutions

Pyrolysis process flow chart

pyrolysis plant

Pyrolysis Plant Hot Sale

Pyrolysis Plant