Hot selling waste rubber pyrolysis machine
Hot selling waste rubber pyrolysis machine
Hot selling waste rubber pyrolysis machine
Hot selling waste rubber pyrolysis machine
Hot selling waste rubber pyrolysis machine
1.waste rubber pyrolysis machine working process waste rubber pyrolysis machine Feed waste rubber into the reactor with auto-feeder, seal the reactor gate and begin to heat the reactor by burning fuel materials in the combustion system, the fuel material can be coal, wood, natural gas and fuel oil. There is a thermocouple installed at the oil gas outlet valve to test the temperature of the oil gas, when thermocouple shows a certain temperature, the oil gas will come out and flow into the cooling system and be converted into liquid oil. At the same time, the oil gas conations CH4, C2H6, C3H8, C4H10 and H2 which cannot be cooled under normal pressure will be recycled back to combustion system to burn as fuel material. The dust and sulfur gas will be removed by the dust removing system. After the gas oil run out, there are slags (carbon black) inside of the reactor,. As waste rubber pyrolysis machine manufacturer-DOING will provide customer a good quality machine with adopt fully automatic vacuum carbon black discharging system that extend the service time. Choosing the suitable raw material is important for customers, it concerns the real profit you can get from your material. Not all kinds of waste rubber can get oil, if you want to get crude fuel oil with high oil yield from waste rubber, please refer to the following form: Here I need to stress that the oil rate only for your reference, as different rubber different result, such as some rubber has very dirty slag, and the rubber is very wet.
Chat Online
Leave A Message