6/8/10T capacity waste plastic pyrolysis to oil plant

Waste plastic pyrolysis to oil plant

 DY-6T capacity waste plastic pyrolysis to oil plant (D2200mm*L6000mm)
1. This mode of waste plastic pyrolysis to oil plant can load 6 tons of plastic.
2. After finishing one batch, with auto-feeder, you don't need to wait the pyrolysis machine cooling down since workers will have to go inside to feed material. If you don't have one, in that way it will be time-wasting and dangerous.
3. Built-in spiral plates, these plates will make the waste plastic go ahead.

DY-8T capacity waste plastic pyrolysis to oil plant (D2200mm*L6600mm)
1. It can load 8 tons of waste plastic.
2. The reactor adopts Q245R steel plant and its thickness is 16 mm, which can bear 500-750 batches.
3. We can also make reactor by material Q245R, which obviously prolong service life 3-5 times.
4. The reactor has two layers, the outer layer built-in cotton insulation, fire cement and steel.

DY-10T capacity waste plastic pyrolysis to oil plant (D2600mm*L6600mm)
1. Working with Auto-feeder, it is able to contain 10 tons or 12tons waste plastic.
2. The diameter of feeding port is 1200mm or 1400mm.
After 2 hours feeding time, it's time to heat the reactor by coal/wood/natural gas/crude oil. Generally speaking, when the temperature ups to 155 Celsius degrees around, the oil gas will generate.
Waste plastic working time you may need:
Let’s take 10 tons waste plastic that processed by DOING waste plastic pyrolysis to oil plant as an example:

• Technical Data

• Application